Cara Mengukur Menggunakan Jangka Sorong

>Hello Sohib EditorOnline, in this article we will discuss about how to measure using a vernier caliper. Vernier caliper or jangka sorong is a tool commonly used in mechanical and engineering fields. This tool is used to measure the diameter or thickness of an object with high accuracy. Vernier calipers consist of three main parts: the main scale, the vernier scale, and the measuring jaws. Let’s take a closer look at how to use this tool.

Part 1: Preparing the Vernier Caliper

Before using a vernier caliper, there are some important steps that must be taken to ensure accurate measurements:

Step 1: Clean the Vernier Caliper

Clean the jaws and measuring surfaces of the vernier caliper with a soft cloth to remove any dirt or debris that may affect the accuracy of your measurements.

Step 2: Check the Calibration of the Vernier Caliper

Check the calibration of the vernier caliper by measuring an object of known size. If the measurement is not accurate, adjust the vernier caliper accordingly.

Step 3: Open the Jaws of the Vernier Caliper

Open the jaws of the vernier caliper by sliding the lock lever to the side. Make sure the jaws are completely open before taking measurements.

Part 2: Taking Measurements with a Vernier Caliper

Now that you’ve prepared your vernier caliper, it’s time to start taking measurements:

Step 1: Place the Object Between the Jaws

Place the object to be measured between the jaws of the vernier caliper. Make sure the object is positioned evenly between the jaws.

Step 2: Close the Jaws of the Vernier Caliper

Close the jaws of the vernier caliper by sliding the lock lever towards the jaws. Make sure the jaws are firmly closed and the object is securely held in place.

Step 3: Read the Measurement

Read the measurement on the main scale and the vernier scale. The main scale provides the whole number measurement, while the vernier scale provides the decimal point measurement.

TRENDING 🔥  Cara Download Foto IG

Part 3: FAQ about Vernier Calipers

Question Answer
1. What is the smallest measurement that can be taken with a vernier caliper? The smallest measurement that can be taken with a vernier caliper is usually 0.01 mm.
2. Can a vernier caliper be used to measure angles? No, a vernier caliper is not designed to measure angles.
3. How do I calibrate my vernier caliper? Calibrate your vernier caliper by measuring an object of known size and adjusting the vernier caliper accordingly.
4. Can I use a vernier caliper to measure the depth of a hole? Yes, a vernier caliper can be used to measure the depth of a hole using the depth gauge.

That’s it! Now that you know how to use a vernier caliper, you can take accurate measurements for your engineering projects. Remember to always clean and calibrate your vernier caliper before use to ensure accurate measurements.

Cara Mengukur Menggunakan Jangka Sorong