Cara Membuat Kipas Angin

>Hello Sohib EditorOnline, today we will guide you through the steps on how to create your very own fan. This DIY project is fun and easy to do, and you will be able to customize your fan to your liking. Let’s get started!

Tools and Materials

Before we begin, let’s take a look at the tools and materials you will need:

Choosing the Right Motor

The first step is to choose the right motor for your fan. You can purchase motors from electronic stores or online marketplaces. The motors should be small and lightweight. We recommend using a 6V DC motor for this project.

Once you have your motor, connect it to a battery pack to test if it’s working correctly. Make sure the motor spins when connected to the battery pack.

Cutting the Cardboard

Next, it’s time to cut the cardboard. You will need the following pieces:

• 1 piece of cardboard measuring 20cm x 20cm for the base
• 4 pieces of cardboard measuring 12cm x 12cm for the blades
• 1 piece of cardboard measuring 8cm x 8cm for the motor mount

Use a saw or scissors to cut the cardboard to the desired sizes.

Creating the Blades

Take each piece of cardboard that measures 12cm x 12cm and draw a diagonal line from one corner to the opposite corner. Cut along the line to create two triangles.

Repeat this step for all four pieces of cardboard. You should have eight triangle pieces in total.

Take four of the triangle pieces and glue them together in pairs, creating two sets of double-thick triangles.

Next, glue the edges of the two sets of double-thick triangles together to form an X shape. Repeat this step for the remaining four triangle pieces.

Attaching the Blades to the Base

Take the base piece of cardboard and mark the centre of the cardboard with a pen or pencil. This will be where the motor mount will be attached.

Use a glue gun to attach the motor mount to the centre of the base piece of cardboard.

Next, attach the blades to the base. Use a wire stripper to strip the ends of three wires. Solder each wire to one of the blades and then connect the other end of the wires to the motor.

Adding a Switch

If you want to be able to turn your fan on and off easily, you can add a switch. Cut a small piece of cardboard and attach it to the base of the fan. Glue a small switch to the piece of cardboard and connect it to the wires. Now you can turn your fan on and off with the switch.

FAQ

How long will it take to make a fan?

The time it takes to make a fan will vary depending on your level of experience with DIY projects. However, on average, it should take around two hours to complete.

Can I use a different type of motor?

Yes, you can use a different type of motor as long as it’s small and lightweight. However, keep in mind that the instructions in this article are specifically for a 6V DC motor.

Can I use a different material instead of cardboard?

Yes, you can use a different material instead of cardboard. However, keep in mind that the instructions in this article are specifically for cardboard.

How can I make my fan more powerful?

You can make your fan more powerful by using a larger and more powerful motor. However, keep in mind that a larger motor may require a larger battery pack and more wires.

What can I use my fan for?

Your fan can be used to cool yourself down on a hot day, or to provide air circulation in a small room.

Cara Membuat Kipas Angin