Cara Menghidupkan HP Xiaomi yang Mati Total Baterai Tanam

>Hello Sohib EditorOnline, have you ever experienced suddenly your Xiaomi smartphone died and couldn’t be turned on? The problem could possibly be caused by an embedded battery. If you are still confused about how to revive the Xiaomi phone that is completely dead due to an embedded battery problem, then this article is for you.

Penyebab HP Xiaomi Mati Total Baterai Tanam

Before finding out how to revive Xiaomi phones that die totally due to batteries that are embedded, you should first know the cause. Here are some of the reasons why Xiaomi phones die totally due to embedded batteries:

Possible Causes	Solution
The phone is experiencing overheating	Don’t use the phone for a while
The phone is experiencing a software error	Perform a factory reset
The battery can no longer be used	Replace the embedded battery

Cara Menghidupkan Kembali HP Xiaomi yang Mati Total Baterai Tanam

Langkah Pertama: Charging

The first thing you need to do is charge the Xiaomi smartphone that has died completely due to an embedded battery. The charging process must be done correctly so that the battery can be reactivated. Here are the steps:

1. Gunakan Charger Asli dan Kabel USB

Make sure you use the original Xiaomi charger and USB cable to charge the phone. This is important to ensure that the charging process runs smoothly.

2. Sambungkan Kabel USB ke Xiaomi Kamu

Connect the USB cable to your Xiaomi smartphone. Make sure the connection is tight and secure.

3. Colokan Charger ke Stop Kontak dan Nyalakan

Plug the charger into an electrical outlet and turn it on to start charging your Xiaomi smartphone. Wait a few minutes until the battery icon appears on the screen.

Langkah Kedua: Masuk ke Mode Recovery

If the charging process doesn’t work, the next step is to enter recovery mode. Here are the steps:

1. Matikan Xiaomi Kamu

Turn off your Xiaomi smartphone by pressing and holding the power button for a few seconds. Then select “Power off”.

2. Tekan Tombol Volume Atas dan Power

Press and hold down the “Volume up” and “Power” buttons simultaneously until the Xiaomi logo appears on the screen.

3. Masuk ke Mode Recovery

After the Xiaomi logo appears, release the power button but keep pressing the volume up button. A menu will appear on the screen, then select “Recovery mode” by pressing the Power button.

Langkah Ketiga: Factory Reset

If the previous steps don’t work, the next step is to reset the smartphone to the factory settings. Here are the steps:

1. Masuk ke Mode Recovery

Follow the steps in the previous section to enter Recovery mode on your Xiaomi smartphone.

2. Pilih Wipe Data/Factory Reset

After entering Recovery mode, select the “Wipe data/Factory reset” menu using the volume keys, followed by pressing the power button.

3. Pilih Yes

The next step is to select “Yes” to confirm the factory reset process. Wait until the process is complete.

FAQ

1. Apa yang harus dilakukan jika Xiaomi saya mati total?

Charge your Xiaomi smartphone using the original charger and USB cable or enter recovery mode and perform a factory reset.

2. Mengapa Xiaomi saya mati total?

There are several reasons why a Xiaomi smartphone experiences total battery failure, including overheating, software errors, or the battery is at the end of its lifespan.

3. Apakah Xiaomi yang mati total masih bisa diperbaiki?

Yes, Xiaomi smartphones that experience total battery failure can still be repaired, including by replacing an embedded battery or performing a factory reset.

4. Apakah charger dan kabel USB penting untuk mencharge Xiaomi?

Yes, using the original charger and USB cable is important to ensure that the charging process runs smoothly.

5. Apa yang harus dilakukan jika Xiaomi saya masih tidak bisa hidup?

If your Xiaomi smartphone still doesn’t turn on after trying the above steps, it’s best to bring it to an authorized Xiaomi service center for further checking and repair.

Cara Menghidupkan HP Xiaomi yang Mati Total Baterai Tanam