Cara Membuat Kursi Santai dari Kayu Bekas

>Hello Sohib EditorOnline, are you looking to make a beautiful and comfortable chair from reclaimed wood? In this journal article, we will guide you in creating your very own unique and environmentally-friendly lounge chair. With a few simple steps, you can turn discarded wood into a stunning piece of furniture that will impress your friends and family. Let’s get started!

Step 1: Preparing the Materials

To begin, you will need to gather the necessary materials. First, find a piece of reclaimed wood that is at least 1.5 meters long and 15-20 centimeters wide. You can find these at a local lumber yard or even in your own backyard. Next, you will need a saw, sandpaper, screws, and a drill.

Choosing the Right Wood

Not all reclaimed wood is created equal. Look for wood that is free of rot, insect damage, and large cracks. The best woods to use are oak, maple, and cherry. These woods are strong and durable, and they have a beautiful grain pattern that will add character to your chair.

Preparing the Wood

Once you have your piece of wood, you will need to cut it into three pieces. The first piece should be 60 centimeters long and 15 centimeters wide. The second piece should be 60 centimeters long and 20 centimeters wide. The third piece should be 45 centimeters long and 20 centimeters wide.

Sanding the Wood

Before you start assembling the chair, you need to sand the wood pieces. Sand them down until they are smooth to the touch. Pay special attention to the edges and corners to avoid splinters.

Cutting Notches

Next, you will need to cut notches into the wood to join the pieces together. Cut two notches in the 60 centimeter-long pieces, one notch in the 45 centimeter-long piece, and one notch in the end of each piece. The notches should be 2.5 centimeters deep and 5 centimeters wide.

Step 2: Assembling the Chair

Now that you have prepared the materials, it’s time to assemble the chair. Follow these steps:

Joining the Two 60cm Pieces

1. Place the two 60 centimeter-long pieces together, with their notches facing each other.
2. Slide the two pieces together until the notches interlock.
3. Using a drill, screw the two pieces together.

Adding the Front Leg

1. Take the 45 centimeter-long piece and place it between the two 60 centimeter-long pieces.
2. Slide the notches on either end of the 45 centimeter-long piece into the notches on the ends of the 60 centimeter-long pieces.
3. Use a drill to screw the pieces together.

Adding the Back Leg

1. Take the 20 centimeter-wide piece and place it at the back of the chair, between the two 60 centimeter-long pieces.
2. Slide the notches on either end of the 20 centimeter-wide piece into the notches on the backs of the two 60 centimeter-long pieces.
3. Use a drill to screw the pieces together.

Adding Support Pieces

1. Cut two pieces of wood that are 30 centimeters long and 15 centimeters wide.
2. Place these pieces between the front and back legs of the chair, just above the seat.
3. Screw these support pieces into the legs and the seat.

Adding the Armrests

1. Cut two pieces of wood that are 60 centimeters long and 10 centimeters wide.
2. Place these pieces on either side of the chair, at the top of the legs.
3. Screw the armrests into the legs.

Sanding and Finishing

Once you have assembled the chair, sand it down once more to smooth out any rough edges. You can then apply a coat of varnish or paint to protect the wood and give it a polished look.

FAQ

We hope you found these instructions helpful in creating your own reclaimed wood lounge chair. Remember to take your time and enjoy the process. Happy woodworking!

Cara Membuat Kursi Santai dari Kayu Bekas